Sensors for 2011 Ram 2500
Knock Sensor To Engine. M8x1.25x30. knock sensor attaching. Transfer Case to Trans. EGR Valve to Cylinder Head. Knock sensor to cyl block. Lower Shock Mounting.
Mounts in Air cleaner hose. Located in clean air duct.
Coolant Temperature Sensor
Engine Oil. Engine Coolant Temerature. In water pump. Coolant temperature. Engine coolant temp.
Bracket Included. Overhead Console. Battery temp.
Black rubber, includes valve stem and cap. Snap-In sensor, black stem.
Abs. Differential Mounted. Axle Mounted. Rear without Traction Control.
.312-18/.312-18x2.00. ABS Sensor. Bearing & Cup. Sensor to Axle. M6x1.00x18.00. .312-18/.312-18x2.25.
.312-18. Clip to RWAL Sensor Bolt. Locking Clip to RWAL Stud. Slave Cylinder to Clutch Housing. Parking Brake Wraparound. Brake Cable Clip to Sensor Bolt. Sensor to Axle. Engine Oil Pickup Tube. Windage Tray to Main Bearing Studs. Tube and Hose.
Anti-lock Brakes Sensor, Front, Right Or Left
Front Right or Left. Front Sensor Right and Left.
Transmission Temperature Thermister. Line Pressure.
Abs. Differential Mounted. Axle Mounted. Rear without Traction Control.
Oxygen Sensor, Before Catalyst, Right
[naa,na1]. After catalyst lt hand downstream. Before catalyst lt hand. Before catalyst rt hand. Left Downstream. Left Upstream. Right Downstream. Right Upstream. Up Stream.
Oxygen Sensor, After Catalyst, Left
Up Stream wire has Black Shield. Before catalyst rt hand upstream. After catalyst lt hand. After catalyst rt hand. After catalyst downstream. [downstream,left].